KingPlast SN75®
Ready to use, silicone based decorative plaster for internal and external application.
Overview
KingPlast SN75 is a highly flexible ready to use, thin-layer decorative plaster for internal and external applications. KingPlast SN75 consists of a unique composition of silicone, mineral fillers, cellulose fibers, pigments, polymers, and water that provides a superb quality decorative plaster can be easily applied by trowel on concrete or cement based substrates to produce a decorative finishing coat with excellent resistance to water and weather conditions for optimum durability. KingPlast SN75 is available in wide range of attractive colours and textures that provide a uniform and stable decorative appearance.
Applications
- To create a decorative textured finishing on building facades externally
- Walls and partitions covering internally
- As a final layer of the External Thermal Insulation Composite System (ETICS) from KINGKRETE
Advantages
- Hydrophobic
- Weather resistant for durable system
- Highly vapour permeable allowing concrete or substrates to breath
- Good thermal characteristics
- Variety of decorative textured finishes
- Variety of colors
- Non-flammable
- Easily cleaned
- Environmentally friendly
- COMPATIBILITY KingPlast SN75 complies with the requirements of ETAG 004
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | Pasty liquid with different grain sizes | — |
| Density | 1.7 ± 0.1 g/cm3 | — |
| Bond strength on concrete | ≥ 1.5 MPa Substrate failure | EN1542 |
| pH | EN : 10 - 11 | ISO787-9 |
| Thermal conductivity | 0.7 ± 0.05 w/mk | EN1745 |
| Water absorption | ≤ 0.1 kg/m2.h0.5 (Class III, Low) | EN1062-3 |
| Water vapour transmition | EN ≥ 150 g/m².d (Class I, | — |
| Durability against Freeze | Passes | — |
| thaw | — | |
| VOC | ≤ 40 g/ltr Complies with LEED The application of this system is not suitable on gypsum based plaster, plastic and resin paints, varnish and oil- based paints, old water based paint and lime paint. Prime the substrate using KingPlast Primer using a shorthair lamb whool roller or a soft brush at a rate of 5 - 8 m² per liter. KingPlast Primer should be used as a bonding agent and a balancing pH system between the different substrates and the silicone plaster. This primer is a water- based system consisting of styrene copolymer binder. It also helps in the uniformity of coloration of the final coat. After priming, at least 24 hours are needed before applying the silicone plaster. | — |
Standards & Approvals
Usage & Packaging
KingPlast SN75 is available in 10 kg buckets and 25 kg pails. KingPlast Primer is available in 18 liters packs. KingPlast SN75 comes with two different systems which is related to the final desired finish. T type: is the normal textured uniform system; wh
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pail, Bucket
Product family
Ready to use acrylic based finish coat for external and internal applic…
Single component, high strength pre-mixed cementitious plaster
One component, high strength pre-mixed cementitious plaster
Single component, high strength pre-mixed cementitious plaster.