Adhesives & Mortar Systems

KingPlast C300^®

Single component, high strength pre-mixed cementitious plaster.

⬇ Download TDS Request a Quote →

wet density

1.8 ± 0.1 kg/ltr

aggregate size

0.6 mm

Coverage

16.0 - 16.5 litres …

Packaging

Bag

Overview

KingPlast C300 is a polymer modified, ready to use Colour: cementitious plaster. KingPlast C300 is composed of a blend of cement, sand, limestone, dry powders Fresh aggregates, selected polymers and fibers which when mixed with water produces a thixotropic mortar suitable for Maximum plastering on vertical and overhead surfaces. Compressive

Applications

Plastering of concrete and blocks surfaces internally and externally

Advantages

Shrinkage controlled polymer modified cementitious plaster
Easy to apply, single component, requires only addition of water
Extremely low permeability to water, providing excellent protection to steel reinforcements and host concrete
Thixotropic properties allowing extra high build, for use To in vertical and overhead applications
drill Suitable for internal and external application
4.0 Available in wide range of colors
added Can be applied either by trowelling or spray methods
slowly speed STANDARDS

Technical Properties

Property	Value	Standard
Available in different colours
wet density	1.8 ± 0.1 kg/ltr	—
aggregate size	0.6 mm	—
strength	≥ 5 MPa @ 28 days Using a polymer modified resin based primer such as KingPlast C300 Contact Primer. KingPlast C300 should be applied after 24 hours after KingPlast C300 Contact Primer. Using a dash slurry coat like KingPlast C100 R0 which will enhance dramatically the bond of plaster with the smooth substrate soaking with water is needed before applying the plaster. For more information of the dash slurry coat, KINGKRETE Technical Department can be consulted or check the Technical Data Sheer for KingPlast C100.	—