Adhesives & Mortar Systems

KingPlast C100^®

Single component, high strength pre-mixed cementitious plaster

⬇ Download TDS Request a Quote →

wet density

2.0 ± 0.1 kg/ltr

aggregate size

1 mm

Coverage

14.5 - 15.5 litres …

Packaging

Bag

Overview

KingPlast C100 is a polymer modified, ready to use Colour: cementitious plaster. KingPlast is composed of a blend of Fresh cement, sand, limestone, dry powders aggregates, selected polymers and fibers which when mixed with water Maximum produces a thixotropic mortar suitable for plastering on Compressive vertical and overhead surfaces.

Applications

Plastering of concrete and blocks surfaces internally and externally

Advantages

Shrinkage controlled polymer modified cementitious plaster
Easy to apply, single component, requires only addition of water
Extremely low permeability to water, providing excellent protection to steel reinforcements and host concrete
To Thixotropic properties allowing extra high build, for use drill in vertical and overhead applications
4.0 Suitable for internal and external application
added Available in wide range of colors
slowly Can be applied either by trowelling or spray methods
speed

Technical Properties

Property	Value	Standard
White and grey
wet density	2.0 ± 0.1 kg/ltr	—
aggregate size	1 mm	—
strength	> 6 MPa @ 28 days Using a polymer modified resin based primer such as KingPlast C100 Contact Primer. KingPlast C100 should be applied after 24 hours after KingPlast C100 Contact Primer. Using a dash slurry coat like KingPlast C100 which will enhance dramatically the bond of plaster with the smooth substrate soaking with water is needed before applying the plaster. For more information of the dash slurry coat, KINGKRETE Technical Department can be consulted or check the Technical Data Sheer for KingPlast C100.	—