Adhesives & Mortar Systems

KingPlast C200^®

One component, high strength pre-mixed cementitious plaster

Coverage

15 - 16 liters/ bag.

Packaging

Bag

Overview

KingPlast C200 is a polymer modified, ready to use cementitious plaster. KingPlast C200 is composed of a blend of cement, sand, limestone, dry powders aggregates, selected polymers and fibers which when mixed with water produces a thixotropic mortar suitable for plastering on vertical and overhead surfaces.

Applications

Plastering of concrete and blocks surfaces internally and externally
Used as a dash slurry coat

Advantages

Shrinkage controlled polymer modified cementitious plaster
Easy to apply, single component, requires only addition of water
Extremely low permeability to water, providing excellent protection to steel reinforcements and host concrete
Thixotropic properties allowing extra high build, for use in vertical and overhead applications
Suitable for internal and external application
Available in wide range of colors
Can be applied either by trowelling or spray methods
STANDARDS KingPlast C200 complies with ASTM C150, Type 1

Technical Properties

Property	Value	Standard
Colour	Grey & white	—
Fresh wet density	1.9 ± 0.1 gm/ cm³	—
Maximum aggregate size	1 mm Using a polymer based primer such as Proprime CP110 and to apply the plaster while the primer is still tacky (20 - 40 minutes depending on ambient temperature). Using a dash slurry coat like KingPlast C100 which will enhance dramatically the bond of plaster with the smooth substrate soaking with water is needed before applying the plaster. For more information of the dash slurry coat, KINGKRETE Technical Department can be KingPlast C100.	—