Adhesives & Mortar Systems

KingPlast C400^®

Single component, high strength pre-mixed cementitious colored textured plaster.

Coverage

15 - 16 liters/ bag.

Packaging

Bag

Overview

KingPlast C400 is a polymer modified, ready to use cementitious colored textured plaster. KingPlast C400 is composed of a blend of cement, sand, pigments, dry powder aggregates, selected polymers and fibers which when mixed with water produces a thixotropic mortar suitable for plastering on vertical and overhead surfaces.

Applications

Plastering of concrete and blocks surfaces internally and externally

Advantages

Shrinkage controlled polymer modified cementitious plaster
Easy to apply, single component, requires only addition of water
Extremely low permeability to water, providing excellent protection to steel reinforcements and host concrete
Thixotropic properties allowing extra high build, for use in vertical and overhead applications
Suitable for internal and external application
Available in wide range of colors
Can be applied either by trowelling or spray methods
STANDARDS KingPlast C400 complies with ASTM C150, Type 1, ASTM C897 and application standard ASTM C926

Technical Properties

Property	Value	Standard
Colour	Different range of colors	—
Fresh wet density	1.8 ± 0.1 gm/ cm³	—
Maximum aggregate size	4 mm Using a polymer based primer such as Proprime CP110 and to apply the plaster while the primer is still tacky (20 - 40 minutes depending on ambient temperature). Using a dash slurry coat like KingPlast C100 which will enhance dramatically the bond of plaster with the smooth substrate soaking with water is needed before applying the plaster. For more information of the dash slurry coat, KINGKRETE Technical Department can be KingPlast C100.	—