Adhesives & Mortar Systems

KingPlast MN75^®

Exterior grade cementitious decorative plaster with high condensate resistance.

⬇ Download TDS Request a Quote →

Fresh wet density

1.9 ± 0.1 g/cm³

Maximum aggregate size

1 mm

Working life

≈ 1 hr

Coverage

15 - 16 litres/25 k…

Packaging

Bag

Standards

2 cited

ASTM C109 · EN998-1

Overview

KingPlast MN75 is a polymer modified, ready mixed decorative cementitious plaster available in many different colours. KingPlast MN75 is composed of a blend of cement, sand, limestone, dry powders aggregates, selected polymers and fibers. It is recommended to apply a compatible water repellent coat after such as KingCoat L.

Applications

External wall decorative finish coat applied on plaster ready substrates

Advantages

Consistent colours
Smooth or textured finish
Shrinkage controlled polymer modified cementitious plaster
Easy to apply, one component, requires only addition of water
Suitable for internal and external applications
Available in wide range of colours
Can be applied either by trowelling or spray methods
STANDARDS KingPlast MN75 complies with ASTM C150, Type 1, ASTM C897 and application standard ASTM C926

Technical Properties

Property	Value	Standard
Fresh wet density	1.9 ± 0.1 g/cm³	—
Maximum aggregate size	1 mm	—
Compressive strength	(wet > 6 MPa @ 28 days cure) /109M-02	ASTM C109
Working life	≈ 1 hr	—
Minimum application	5⁰C	—
temperature		—
Bulk density	1.50 ± 0.05	—
Fire index	: Class A1	EN998-1
VOC	< 10 g/ltr PLACING AND FINISHING The suitable thickness of application is up to 8 mm. KingPlast MN75 is applied by trowel or hopper spray gun. The mixed mortar should be applied using firm pressure to fully compact the mortar and ensure good adhesion to the substrate. Finishing and leveling should be carried out initially by wooden or plastic float. Final finishing should be carried out using a slightly water damped steel float.	—