Adhesives & Mortar Systems

KingPlast CE75^®

Flexible fiber reinforced exterior grade cementitious decorative plaster with high mould, UV, weather, frost, impact and water resistance

⬇ Download TDS Request a Quote →

Fresh wet density

1.90 ± 0.1 g/cm³

Working time

≈ 1.5 – 2 hr

Maximum aggregate size

1 mm

Coverage

16 litres/bag. King…

Packaging

Bag

Standards

1 cited

ASTM C109

Overview

KingPlast CE75 is a polymer modified cement wall finishing decorative plaster applied in up to 3 mm thickness. KingPlast CE75 is supplied as a ready mixed blend of dry powders which requires only the site addition of clean water to produce a consistent cementitious mortar.

Applications

KingPlast CE75 is designed as a decorative wall finishing plaster to be applied up to 3 mm thickness on render and concrete walls to produce an artistic textured wall finish

Advantages

High mould resistance
High UV resistance
High weather resistance
Shrinkage controlled polymer modified plaster
Easy to apply, one component, requires only addition of water
Excellent bonding
Suitable for internal and external applications
Available in many colours

Technical Properties

Property	Value	Standard
The following results were obtained at a water	powder ratio of 0.2 by weight.	—
Fresh wet density	1.90 ± 0.1 g/cm³	—
Working time	≈ 1.5 – 2 hr	—
Compressive strength	(wet > 10 MPa @ 28 days cure) /109M-02	ASTM C109
Minimum application	5⁰C	—
temperature		—
Maximum aggregate size	1 mm	—
VOC	< 10 g/ltr Water addition may vary slightly according to both the ambient temperature and the desired consistency of the mix, but it should not exceed 5.5 litre.	—