KingCoat CT100 System
Heavy duty solvent free coal tar modified epoxy based flooring system
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
Build-up
Applied in this order, from the substrate up. Layers drawn with a dashed outline are optional.

| No. | Product | Function | Rate or thickness |
|---|---|---|---|
| Substrate | Concrete (min 25 N/mm², RH <80%) or steel (SA 2½) floors and decks: car parks, bridges, ship/offshore and helicopter decks, industrial floors | ||
| 1 | KingFloor Primer or KingFloor Primer S Cure 24 h. More than one coat on porous or textured surfaces | Primer | 5 m²/kg @ 200 microns DFT |
| 2 | KingCoat CT100 Spread by rake in lanes of 3 m maximum | Coal-tar epoxy slurry body coat (base + hardener + filler) | 6.1 kg/m² @ 3.5 mm or 9.6 kg/m² @ 5.5 mm |
| 3 | KingFloor AS100 Grade No. 2. Broadcast to refusal into the wet slurry; remove excess after initial cure. Use larger aggregate on ramps | Broadcast aggregate / wearing surface | 5-6 kg/m² (AS100 No. 2) or 6.5-7.5 kg/m² (AS100 No. 0) |
Turn the build-up in 3D
Build-up options
- Medium traffic: final thickness 3-3.5 mm (slurry 6.1 kg/m²)
- Heavy traffic: final thickness 5-5.5 mm (slurry 9.6 kg/m²). The aggregate grade (AS100 No. 2 or AS100 No. 0) sets the final thickness
About this system
KingCoat CT100 is a heavy duty solvent free coal tar modified epoxy flooring system. The product comprises of a base, hardener and graded filler, which when mixed form a fluid, homogenous slurry. After spreading KingCoat CT100 slurry and while still wet, hard wearing silica aggregates should be broadcasted onto the slurry. KingCoat CT100 cures to a durable, anti-slip, extremely hard wearing surface. Depending on the used Antislip Aggregate, final dry thickness can be (3 - 3.5 mm) for medium traffic or (5 - 5.5 mm) for heavy traffic.
Where to use
- Car parks
- Roads and bridges
- Offshore oil platforms
- Ship decks
- Industrial floors
- Helicopter decks (pad)