KingBond PU100®
General purpose polyurethane adhesive sealant.
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
- Tensile strength ASTM D412
- > 1.8 MPa @ 7 days
- Elongation ASTM D412
- > 700% @ 7 days
- Hardness Shore A ASTM C661
- 30 ± 5 @ 7 days
- Density
- 1.16 ± 0.05 g/cm³
Overview
KingBond PU100 is a one-component general purpose polyurethane adhesive sealant specially designed to form a flexible and permanent bonding agent for a wide range of substrates and construction materials.
Where to use
KingBond PU100 is suitable for adhering and fixing several types of materials on common substrates including concrete, masonry, stone, aluminium, galvanized steel, ceramic, porcelain, wood, mirrors, painted metals and steel.
Examples of applications include but are not limited to:
- Cover plates, gaskets and coverings.
- Paver caps, masonry veneer and faux stone.
- Roof tiles.
- Fixing pedestals in raised access floors.
- Various truck, bus and trailer assemblies.
- Wood or metal window and door frames.
Why use it
- High adhesion strength with all common construction materials.
- Fast curing rate.
- Highly durable.
- Excellent weathering resistance.
- Wide service temperature range.
- Non-corrosive.
- Water-resistant.
Technical properties
Values @ 23°C, 50% RH
| Density | 1.16 ± 0.05 g/cm³ |
|---|---|
| Hardness Shore AASTM C661 | 30 ± 5 @ 7 days |
| Curing rate | ≈ 2.5 - 3.5 mm/day |
| ElongationASTM D412 | > 700% @ 7 days |
| Tensile strengthASTM D412 | > 1.8 MPa @ 7 days |
| Service temperature | -30 up to 100°C |
| Application temperature | 5 up to 50°C |
| Effects of accelerated weatheringASTM C793 | No cracking |
| Effect of heat agingASTM C1246 | Pass @ 70°C |
| VOCASTM D2369 | ≤ 65 g/ltr (comply with LEED) |
How to use
Surface preparation
All substrates should be clean, dry, free from dust, oil, grease and any contaminations that could affect the adhesion.
If the substrates need clean, use methyl ethyl ketone (MEK), acetone or grease remover. Always be sure that the substrates are dry before the application.
Application
The recommended application temperature range is 5°C to 50°C. For cold weather application, store the product in a heated area at 20°C for 24 hours before use.
Extrude the adhesive firmly on the bonding surface in a bead or as spot welding.
Cleaning
Clean tools and equipment first with paper towels and then wipe with Acetone, xylene or other suitable solvents.
Coverage, packaging and storage
Packaging
KingBond PU100 is available 600 ml sausages or 280 ml cartridges.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.