KingFix EPW100®
Three-component, water based epoxy tile adhesive and grout with improved abrasion, water and chemical resistance.
Overview
KingFix EPW100 is a water-based epoxy tile adhesive and grout consisting of 3 pre-weighted components of epoxy resin, hardener and selected filler that when mixed together produce a thixotropic paste suitable for permanent fixing of all types of ceramic tiles and stones in vertical and horizontal applications. The high adhesion strength and chemical resistance of KingFix EPW100 makes it an ideal option for installing and grouting tiles in industrial and commercial areas.
Applications
- Commercial centers
- Low to medium duty industrial areas
- Recreation centers
- Other high traffic areas
- Swimming Pools
- Kitchens
- Applied on both concrete & steel substrates
Advantages
- High abrasion resistance
- High slip resistance, for demanding vertical tiling
- High bond strength
- Mould and stain resistance
- Water impermeable
- Fast setting
- Suitable for all ceramic tiles and stones
- Suitable for internal, external and submerged conditions
- Available in a wide range of colours
- STANDARDS KingFix EPW100 complies with ANSI A118.8
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Mixed density | 1.8 ± 0.1 g/cm3 | — |
| Water cleanability | ANSI: Pass A118.8,5.1 | — |
| Initial set | ANSI A118.8,5.2: 5 hr | — |
| Final set | ANSI A118.8,5.3: 9 hr Shear strength to imperious ≥ 3.5 MPa @ 7 days | — |
| tiles | ANSI A118.8,5.6.2 Shear strength to imperious ≥ 3.5 MPa @ after water | — |
| tiles | ANSI A118.8,5.6.3 | — |
| Compressive strength | ANSI ≥ 35 MPa @ 10 days A118.8,5.8 | — |
| Tensile strength | ANSI: ≥ 3 MPa @ 10 days A118.8,5.9 | — |
| Flexural strength | ANSI: ≥ 9 MPa @ 10 days A118.8,5.10 | — |
| Water absorption | ANSI: 5% (50% RH to immersion) A118.8,5.11 | — |
| Application temperature | 5 to 38oC | — |
| VOC | : ≤ 30 g/ltr 2)As a tile grout Joint surfaces should be clean and free from dust or any contamination. Joints should be cleaned to the full thickness of the tile or to a minimum depth of 2/3 of the tile thickness. Joints should be dry before grout filling. | ASTM D2369 |
Standards & Approvals
Usage & Packaging
KingFix EPW100 is available in 6 kg packs.
When used as a tile adhesive, each 6 kg pack shall cover 2.2 m² at 1.5 mm thickness. The approximate yield of the grout can be calculated as per the following equation: As tile adhesive: 1.65 kg/m² @ 1 mm thickness. As grouting: The approximate yield of t
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Pack
Product family
Ready to use tile adhesive
General purpose, cementitious tile adhesive with high slip resistance f…
Solvent free, three component epoxy based tile adhesive and grout with …
Flexible, fast setting two component solvent free epoxy tile adhesive a…