KingFix C10®
General purpose, cementitious tile adhesive with high slip resistance for internal and external use
Overview
KingFix C10 is a general purpose, polymer modified cement based tile adhesive for bonding all types of ceramic tiles and stone on most common construction substrates for internal and external applications using the thin bed method. KingFix C10 is supplied in the form of white or grey powder that is ready to use with the addition of water to provide a good workable and easy to apply tile adhesive. Since it has excellent slip resistance properties, KingFix C10 is suitable to be applied vertically without sagging and with no need for using spacers for normal sized tiles. KingFix C10 can be used in wet or dry conditions.
Applications
- For wall and floor applications
- Suitable for exterior and interior applications
- Can be used in wet areas such as bathrooms and kitchens
- Can be used with under floor heating systems
- On concrete, cement based mortar, screed and plaster
- On drywall such as gypsum boards and fiber cement boards
Advantages
- General purpose can be used in wet or dry conditions, internally or externally
- Good bond strength to all common substrates
- Easy to apply, non-sag with good workability
- Economical
- Ready mixed, just requires the addition of water
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Colour | White or grey | — |
| Fresh wet density | 1. 85 ± 0.1 g/cm³ | — |
| Pot life | 2 hr @ 25oC Shear strength to impervious > 14 kg/cm2 @ 7 days > | — |
| tile | ANSI A118.4, 5.2.2 &: 24 kg/cm2 @ 28 days 5.2.4 Shear strength to impervious >10.5 kg/cm2 @ 7 days | — |
| tile after water immersion | ANSI A118.4, 5.2.3 Tensile adhesion strength in compliance with | ISO 13007-2.4.4 |
| Initial bond @ 28 days | >0.5 MPa | — |
| After heat exposure | >0.5 MPa | — |
| After water immersion | >0.5 MPa | — |
| After freeze/thaw cycles | >0.5 MPa | — |
| VOC | : < 10 g/ltr (complies with LEED) STANDARDS | ASTM 2369 |
| KingFix C10 complies with the following standards | cementitious tile adhesive with slip resistance (C1T). ANSI A118.4 "Standard Specification for Latex- Portland Cement Mortar". KingFix® C10 General purpose, cementitious tile adhesive with high | — |
Standards & Approvals
Usage & Packaging
KingFix C10 is available in 25 kg bags.
Approximately 8.75 m²/25 kg bag @ 2 mm thickness.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag
Product family
Ready to use tile adhesive
Solvent free, three component epoxy based tile adhesive and grout with …
Flexible, fast setting two component solvent free epoxy tile adhesive a…
Highly flexible fast setting three component performance solvent free ep…