Water Infrastructure

Watertight concreteBasements, tanks and below-ground structures built watertight from the mix. 7 matches → Sulfate & chemical-resistant concreteConcrete in aggressive ground, sewage and process environments. 6 matches → Structural concreteFrames, slabs, columns and walls: workability, strength and durability. 14 matches → Ready-mix superplasticiser rangeThe KingMix polycarboxylate (PCE) range for ready-mix and site-batched concrete. Grades differ in water reduction, slump retention and early strength; your KingKrete engineer matches the grade to your cement, aggregates and placing time. 48 matches → Hot-weather concretingFor: summer pours in high temperatures: slump retention and controlled setting. 13 matches → Corrosion-protected concreteFor: reinforced concrete exposed to chlorides from sea air, de-icing or car traffic. 2 matches → Shrinkage-controlled concreteFor: slabs, toppings and long pours where drying-shrinkage cracking must be limited. 1 match → Piles & diaphragm wallsFor: bored piles and diaphragm walls: long workability and cohesive tremie concrete. 4 matches →

Curing of slabs & decksCuring compounds that protect fresh concrete as it gains strength. Remove the curing film before any bonded screed, coating or tiling. 11 matches → Formwork releaseRelease agents for clean striking of cast-in-place formwork. 5 matches → Evaporation control in hot weatherFor: fresh slabs in sun and wind: stops plastic-shrinkage cracking before curing starts. 3 matches →

Sewage tank and manhole liningFor: maximum chemical and abrasion resistance. 2 matches → Active water leak pluggingFor: immediate stop to running water. 2 matches → Wet or moving crack injectionFor: active leaks, live/moving cracks. 2 matches → Structural crack injectionFor: dry, static cracks 0.2-10mm. 2 matches → Structural repair, horizontal or formedFor: high strength, large volume, free-flow. 3 matches → Manhole cover reinstatementFor: heavily trafficked areas, rapid turnaround. 1 match → Water-retaining structure repairRepairs to tanks, channels and basins in contact with water. 24 matches → Structural strengthening (CFRP)Carbon-fibre plates and wraps to add capacity to beams, slabs and columns. 6 matches → Sprayed concrete repairFor: large areas of spalled soffits and walls, rebuilt by spraying. 7 matches →

Reinforced masonry void fillingFor: bond beams, block cores. 1 match → Machine base plate groutingFor: standard duty, ambient temperature; heavy dynamic or vibration load. 6 matches → Structural anchoringFor: cracked or uncracked concrete, seismic-rated. 2 matches → Pile top fairing and void fillingFor: high-flow pourable grout. 3 matches → General-duty anchoringFor: handrails, dowels, non-structural fixings. 4 matches →

Water-retaining structure jointsFor: non-potable, limited movement. 4 matches → Exterior movement jointsFor: weather-exposed, high movement. 10 matches →

Sewage & wastewater liningsLinings for sewers, manholes and wastewater structures. 17 matches → Potable-water contact surfacesCoatings for surfaces in contact with drinking water. 15 matches → Chemical-resistant liningsLinings for bunds, process areas and chemical containment. 16 matches → Steel structures & tank exteriorsPolyurethane and epoxy protection for steel and tank shells. 20 matches →

Chemical-resistant floorsFloors for labs, battery rooms and process plant. 11 matches → Plant rooms & workshopsHard-wearing, oil-resistant floors for plant and workshops. 22 matches → Control RoomsFloor systems for control rooms. 2 matches →

Retaining WallsWaterproofing for: positive-side accessible; negative-side only. 19 matches → Joints (Construction & Movement)Waterproofing for: construction joints; expansion / movement joints. 23 matches → Drainage Structures (Culverts, Channels)Waterproofing for: gravity flow; permanently wet; aggressive / contaminated water. 15 matches → RoofsWaterproofing for: non-exposed roof; exposed flat roof; exposed Sloped roof; roof garden / landscaped roof; sloped metal roof (profiled / standing seam). 34 matches → Plant RoomsWaterproofing for: wet service areas; critical equipment areas. 6 matches →

Submerged tile fixingFor: swimming pools, tanks, potable water. 12 matches → Submerged tile groutingFor: swimming pools, tanks. 12 matches → Chemical-exposed process area tilingFor: fixing and grouting, chemical/abrasion resistance. 5 matches →