Dams & Hydropower

Mass concreteLarge pours and foundations where heat and setting time must be controlled. 12 matches → Watertight concreteBasements, tanks and below-ground structures built watertight from the mix. 7 matches → Underwater concreteConcrete placed under water without washout. 3 matches → Cold-weather concretingAccelerating and antifreeze admixtures for concreting in low temperatures. 5 matches → Hot-weather concretingFor: summer pours in high temperatures: slump retention and controlled setting. 13 matches → Piles & diaphragm wallsFor: bored piles and diaphragm walls: long workability and cohesive tremie concrete. 4 matches →

Curing of slabs & decksCuring compounds that protect fresh concrete as it gains strength. Remove the curing film before any bonded screed, coating or tiling. 11 matches → Formwork releaseRelease agents for clean striking of cast-in-place formwork. 5 matches → Evaporation control in hot weatherFor: fresh slabs in sun and wind: stops plastic-shrinkage cracking before curing starts. 3 matches →

Wet or moving crack injectionFor: active leaks, live/moving cracks. 2 matches → Active water leak pluggingFor: immediate stop to running water. 2 matches → Structural crack injectionFor: dry, static cracks 0.2-10mm. 2 matches → Structural repair, vertical or overheadFor: high strength, trowel-grade. 4 matches → Steel reinforcement primingFor: exposed or corroding rebar before patching. 4 matches → Water-retaining structure repairRepairs to tanks, channels and basins in contact with water. 24 matches → Structural strengthening (CFRP)Carbon-fibre plates and wraps to add capacity to beams, slabs and columns. 6 matches → Sprayed concrete repairFor: large areas of spalled soffits and walls, rebuilt by spraying. 7 matches →

Structural anchoringFor: cracked or uncracked concrete, seismic-rated. 2 matches → Anchoring in stone or masonryFor: solid or hollow masonry, natural stone, voided rock. 1 match → Machine base plate groutingFor: standard duty, ambient temperature; heavy dynamic or vibration load. 6 matches → Underwater groutingGrouting and anchoring below water. 9 matches → Pile top fairing and void fillingFor: high-flow pourable grout. 3 matches →

Water-retaining structure jointsFor: non-potable, limited movement. 4 matches → Exterior movement jointsFor: weather-exposed, high movement. 9 matches →

Water-repellent impregnationBreathable water repellents for facades, decks and paving. 8 matches → Steel structures & tank exteriorsPolyurethane and epoxy protection for steel and tank shells. 20 matches →

Plant rooms & workshopsHard-wearing, oil-resistant floors for plant and workshops. 22 matches →

Tunnel LiningsWaterproofing for: cut-and-cover / accessible; high groundwater expected. 9 matches → Substructures (Piers, Abutments, Foundations)Waterproofing for: with hydrostatic pressure; splash / tidal zone; aggressive ground conditions. 20 matches → Drainage Structures (Culverts, Channels)Waterproofing for: gravity flow; permanently wet; aggressive / contaminated water. 14 matches → Expansion & Movement Joints (Infrastructure)Waterproofing for: static construction joints; movement / seismic joints. 23 matches → Retaining WallsWaterproofing for: positive-side accessible; negative-side only. 19 matches → Dams, spillways & channelsWaterproofing and joint systems for dams and water channels. 11 matches → Plant RoomsWaterproofing for: wet service areas; critical equipment areas. 6 matches →