KingPro AC®
High performance ready to use putty
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
Overview
KingPro AC is an acrylic based, ready to use white putty for smoothing of internal concrete surfaces, sand/ cement plaster, and gypsum boards. KingPro AC will give an even smooth surface ready for subsequent coating application. It can also be used for filling hair line cracks and joints between gypsum boards.
Where to use
KingPro AC is designed for use internally in applications, such as:
- Fairing and smoothing putty over concrete, plaster and gypsum boards.
- Filling hair line cracks in combination with appropriate mesh.
- Filling joints between adjacent gypsum boards in conjunction with appropriate mesh.
Why use it
- Single component; ready to use.
- Excellent bonding.
- Quick drying.
- Easy to apply.
- Smooth finish.
Technical properties
| Density | 1.75 - 1.85 |
|---|---|
| Colour | White |
How to use
Surface preparation
All surfaces should be sound and clean from dust and foreign matter. Ridges and trowel marks should be removed by abrasion.
Mesh reinforcement should be used along with KingPro AC over hair line cracks, joints of gypsum boards and block/cement interfaces.
Application
Apply the first coat using spatula / trowel and allow to dry. Smoothen the first layer using fine sand paper before applying subsequent layers. KingPro AC can be applied in multiple layers to reach the required thickness or even surface. Light sand paper may be used to smoothen the dry final layer before painting preferably within 8 - 10 hours.
Coverage, packaging and storage
Coverage
Approximately 1.8 kg/ m² @ 1 mm thickness.
Packaging
KingPro AC is available in 25 kg bags.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.