KingFill C600®
Exterior grade cementitious ceramic tile and stone grout for joints up to 6 mm with abrasion resistance, mould, stain and water repellency
Overview
Interior and exterior tile grout, suitable for grouting all types of ceramic tiles on floors and walls when water repellent grout is required.
Applications
- For grouting of all types of ceramic tiles
- Suitable for bathrooms, kitchens and wet areas
- Non-sag, can be used for wall applications
- Can be used internally and externally
- High polymer content
Advantages
- Water repellent
- Hygienic and mould repellency
- Improved abrasion resistance
- Stain repellency
- Ready mixed, just requires the addition of water
- High bond strength
- Suitable for internal and external applications
- Available in a wide range of colours
- STANDARDS KingFill C600 complies with BS5980 and BS EN13888 :
- 2002
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Compressive strength | 4 MPa @ 1 day @ room | — |
| EN12808-3 | temperature) ≥ 15 MPa @ 28 days @ room temperature | — |
| Working time | ≈ 90 min @ 20°C ≈ 30 min @ 35°C | — |
| Minimum application | 5°C | — |
| temperature | — | |
| Fresh wet density | 1.75 ± 0.10 g/cm3 | — |
| Resistance to abrasion | 491 mm³ | EN12808-2 |
| Shrinkage | 0.025 mm/m Water absorption after 240 1.7 g | — |
| mm | Finish by running the tip of the gloved finger over the surface or by using a suitably curved tool. After drying, clean tiles with a damp sponge. It is recommended to remove grout from the tile surfaces before full setting of the grout. Failure to do so may result in difficulty in removing any remains. | EN12808-5 |
Standards & Approvals
Usage & Packaging
KingFill C600 is available in 5 kg bags.
The approximate yield of grout can be calculated as per the following equation: Yield (m²/kg) = 5.7 WD (0.02 + 1/L+1/H) Where; L: Tile length (cm) H: Tile width (cm) D: Average joint depth (mm) W: Average joint width (mm) Note: Grout yield subject to ±15%
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Bag
Product family
Cementitious ceramic tile grout with high abrasion/resistance for joint…
High performance and water repellant cementitious tile grout for joints…
Water repellent cementitious grout for ceramic tiles
Two component, high performance cementitious tile grout with high abras…