Adhesives, Mortars & Plasters
KingInsulate C500 External Wall Insulation System
External wall insulation with the highly flexible, higher-bond KingInsulate C500 as board adhesive and meshed base coat
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
Build-up
Applied in this order, from the substrate up. Layers drawn with a dashed outline are optional.

| No. | Product | Function | Rate or thickness |
|---|---|---|---|
| Substrate | Concrete, cement plaster or masonry walls (also roofs); clean, dimensionally stable; very porous substrates pre-wetted | ||
| 1 | KingInsulate C500 Applied as a perimeter strip plus spots on the board back (toothed trowel on smooth substrates). No primer | Board adhesive | approx. 3 mm; approx. 6 m² per 25 kg bag |
| 2 | Thermal insulation board (EPS, XPS or mineral wool) Fixed with adhesive plus mechanical fasteners. Fill large gaps with board strips. Corner angles (PVC/aluminium/stainless) at edges | Insulation board | |
| 3 | KingInsulate C500 More than one layer may be applied | Protective base coat (highly flexible) | approx. 5 mm; approx. 3.75 m² per 25 kg bag |
| 4 | Reinforcing mesh Pressed into the fresh base coat to mid-depth, then trowelled smooth. Overlaps approx. 10 cm | Reinforcement embedded in base coat | |
| 5 | Decorative finish Optional Suitable to receive a wide range of decorative finishes. | Finish coat | |
Build-up options
- The product can also be used on its own as a board adhesive or as a base coat
About this system
KingInsulate C500 is a cementitious adhesive specially designed to be used for permanent fixing of thermal insulation boards to a wide range of substrates including concrete, and masonry. KingInsulate C500 is also designed for use as a protective mortar providing a durable layer for insulation boards that is suitable to receive several types of decorative finishes.
Where to use
- For permanent fixing of expanded and extruded polystyrene boards to walls and roofs
- For permanent fixing of mineral wool boards to walls and roofs
- Provides a strong and smooth layer over thermal insulation boards
- To be used with reinforcing mesh to form a solid layer to protect insulation boards