Adhesives, Mortars & Plasters
KingInsulate C250 External Wall Insulation System
External wall insulation with the flexible KingInsulate C250 as board adhesive and meshed base coat
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
Build-up
Applied in this order, from the substrate up. Layers drawn with a dashed outline are optional.

| No. | Product | Function | Rate or thickness |
|---|---|---|---|
| Substrate | Concrete, cement plaster or masonry walls (also roofs); clean, dimensionally stable; very porous substrates pre-wetted | ||
| 1 | KingInsulate C250 Applied as a perimeter strip plus spots on the board back (toothed trowel on smooth substrates). No primer | Board adhesive | approx. 3 mm; approx. 6 m² per 25 kg bag |
| 2 | Thermal insulation board (EPS, XPS or mineral wool) Fixed with adhesive plus mechanical fasteners. Fill large gaps with board strips. Corner angles (PVC/aluminium/stainless) at edges | Insulation board | |
| 3 | KingInsulate C250 More than one layer may be applied | Protective base coat | approx. 5 mm; approx. 3.75 m² per 25 kg bag |
| 4 | Reinforcing mesh Pressed into the fresh base coat to mid-depth, then trowelled smooth. Overlaps approx. 10 cm | Reinforcement embedded in base coat | |
| 5 | Decorative finish Optional Suitable to receive a wide range of decorative finishes. | Finish coat | |
Build-up options
- The product can also be used on its own as a board adhesive or as a base coat
About this system
KingInsulate C250 is a cementitious adhesive specially designed to be used for permanent fixing of thermal insulation boards to a wide range of substrates including concrete, and masonry. KingInsulate C250 is also designed for use as a protective mortar providing a durable layer for insulation boards that is suitable to receive several types of decorative finishes.
Where to use
- For permanent fixing of expanded and extruded polystyrene boards to walls and roofs
- For permanent fixing of mineral wool boards to walls and roofs
- Provides a strong and smooth layer over thermal insulation boards
- To be used with reinforcing mesh to form a solid layer to protect insulation boards
- Suitable to receive a wide range of decorative finishes