KingBond PVA100®
PVA bonding agent for cement mixes and concrete repairs.
Overview
KingBond PVA100 is a single component PVA based, white viscous liquid, specially formulated for use as a multi-purpose adhesive and a bonding agent for cement mixes and as an admixture for mortars.
Applications
- KingBond PVA100 is ideally designed for use as multi purpose adhesive, cement admixture in cement base mixes and as primer and integral bonding agent for concrete. Ideal for priming surfaces prior to plastering or painting
- Used as an admixture in cement/sand and granolithic screeds
Advantages
- Single component, easy to use
- Bond many types of construction materials
- High bond strength provides excellent adhesion when used as bonding agent for cement based mixes
- No Chloride admixtures
- Improves renders and mortars durability
- Colour go to clear when dries
- Concentrated which make it economical
- Solvent free
- STANDARDS KingBond PVA100 complies with ASTM C1059-99, Type 1, when tested in accordance with test method ASTM C1042
Technical Properties
| Property | Value | Standard |
|---|---|---|
| Appearance | White viscous liquid | — |
| pH | 4 – 5 | — |
| Specific gravity | 1.0 – 1.05 | — |
| Slant shear strength | Type I > 2.8 MPa (Dry curing) | ASTM C1042 |
| Stability | Stable in alkaline conditions | — |
| Compatibility | Compatible with all types of portable cement | — |
| Cement screeds and plasters bonding agent | Porous surfaces should be sealed using diluted KingBond PVA100 (1 part KingBond PVA100 to 4 parts water) which should be brushed vigorously into the prepared surface making sure to fill all pores and voids and allow it to get dry. Apply Diluted KingBond PVA100 (1 part KingBond PVA100 to 1 part water) to the sealed surface using a brush. Make sure to apply the plaster or repair mortar whilst the applied coating is still tacky. | — |
| Sealer coat and dust proofing | Diluted KingBond PVA100 (1 part KingBond PVA100 to 4 parts water) should be applied by brush over the target surface and allowed to dry. | — |
| Note | for porous surfaces other coat should be applied to assure appropriate seal. | — |
| Admixture in Cement/Sand screeds | Use it as an admixture in cement/sand screeds in both light traffic and heavy traffic areas. Supposed mixes is as | — |
| the following | — | |
| Component | Light traffic kg High traffic kg | — |
| Cement | 100 | — |
| Sand | 300 100 | — |
| Granite (4 - 6 mm) | - 200 | — |
| KingBond PVA100 2000 20 | 25 Prime the prepared surface with diluted KingBond PVA100 (1 part KingBond PVA100 to 4 parts water). The dry components should be mixed together. Add water to the mix to achieve a semidry mix and then add the KingBond PVA100 and mix, more water could be added to achieve the required workability. Lay the mix on the tacky primed surface, tamp it and smooth it using trowels. KingBond® PVA100 PVA bonding agent for cement mixes and concrete repairs. | — |
Standards & Approvals
Usage & Packaging
KingBond PVA100 is available in 1 kg plastic buckets, 5 kg metal tin, and 200 kg drums.
Bonding agent: 16 m² when diluted 1 to 1. Sealer coat: 25m² when diluted 1 to 4. Admixture: 20 - 25 litre/100 kg Cement depending on use. Note: The coverage rate differs from surface to another depending on the porosity of the surface.
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature
Drum, Bucket, Tin
Product family
Acrylic bonding and curing agent for cement mixes and concrete repair.
Epoxy bonding agent for concrete.
Solvent free, two part epoxy adhesive for segmental concrete bridges.
Solvent free, two part epoxy adhesive