Adhesives & Mortar Systems

KingInsulate PF100^®

One component polyurethane, moisture cure, expanding foam

⬇ Download TDS Request a Quote →

Tack free time

After ≈ 11 – 13 mins.

Elongation at tension

≈ 26% DIN53430

DIN53430

Shear strength

DIN53427: 6 N/ cm²

DIN53427

Coverage

Up to 35 liters in …

Packaging

Cartridge/Tube

Standards

5 cited

DIN 53430 · DIN4102

Overview

KingInsulate PF100 is general purpose polyurethane assembly foam, based on a moisture curing polyurethane prepolymer, ready to use in aerosol cans for easy

Applications

KingInsulate PF100 is used for installing, fixing and filling gaps in many applications in the building industry, such as:
Installation of new and replacement windows and doors, where clean and controlled backfill is required
Installation and filling of pipes and duct work entries
Filling of holes and gaps
Fixing of wall panels and roof stones
Thermal insulation
Roller blinds (sealing of connection joints)
Entrance door linings
Any kind of small breakthroughs in walls and other cavities

Advantages

Cured foam is a good heat and sound insulator, prevent heat loss through gaps
Strong adhesive properties to most building materials with the exception of Teflon, polyethylene, silicone, oil and grease and similar substrates
Fast curing
Ease of application
Ozone friendly – The propellant mixture is free of CFC’s
STANDARDS KingInsulate PF100 complies with EN29001

Technical Properties

Property	Value	Standard
Bulk density	≈ 17 gm/ cm³	—
Cell structure	Fine – medium	—
Tack free time	After ≈ 11 – 13 mins.	—
Cuttable (20 mm bead)	After ≈ 18 – 21 mins. Full stability load bearing (20 After ≈ 12 hrs.	—
mm bead)		—
Working temperatures	5 - 35ºC	—
Optimum working	20ºC	—
temperature		—
Tensile strength	10 N/ cm² Compressive strength at 10% 2 N/ cm²	DIN 53430
stress		DIN53421
Elongation at tension	≈ 26%	DIN53430
Shear strength	: 6 N/ cm²	DIN53427
Thermal conductivity	30 - 35 W/ mK Temperature resis- tance of -40 - 80ºC -40 - 100ºC	—
the cured bead	Long term Short term	—
Flammability	: Class B3	DIN4102
Toxicity	Toxic when wet, not toxic once cured	—