KingFix PS50®
Ready to use interior grade ceramic tile adhesive based on organic binder with extended open time
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
- Specific gravity
- 1.65 ± 0.05
- Solid content
- 78 ± 2%
Overview
KingFix PS50 is a ready to use dispersion tile adhesive based on acrylic binder, fine filler and combination of selected additives that provides a high performance tile adhesive suitable for vertical and horizontal surfaces in internal applications.
The high adhesion strength properties of KingFix PS50 makes it ideally suitable for fixing all types of small and medium size ceramic tile on several substrates such as cementitious plaster, gypsum boards, painted walls and old tiles.
Where to use
- For permanent installation of ceramic tiles internally.
- Suitable for the applications on drywall such as gypsum boards and plaster boards.
- Non sagging, suitable for wall applications.
- Can be used in temporary wet areas.
- On concrete and cement based mortar, screed and plaster.
Why use it
- Ready to use adhesive, does not need the addition of water or mixing.
- High adhesion strength on different types of substrates.
- Excellent thixotropic properties, non-slip on vertical applications.
- Extended open time.
- Environmentally friendly, based organic binder.
Technical properties
Values @ 25°C
| Appearance | White pasty |
|---|---|
| Specific gravity | 1.65 ± 0.05 |
| Solid content | 78 ± 2% |
| Open timeISO 13007-2,4.1 | ≥ 30 min |
| Shear adhesion strengthISO 13007-2,4.3.4 | ≥ 1.5 MPa |
| Shear adhesion strength after heat agingISO 13007-2,4.3.6 | ≥ 2.5 MPa |
| SlipISO 13007-2,4.2 | ≤ 0.5 mm |
| VOCASTM D2369 | < 15 g/ltr |
Standards and approvals
KingFix PS50 complies with ISO 13007-1 standard as a normal dispersion tile adhesive with slip resistance and extended open time characteristics (D1TE).
How to use
Substrate preparation
- All surfaces must be clean, dry and free from dust, oil, grease, paints or any loose material.
- Concrete and cement based substrates must be sufficiently cured and dimensionally stable. Allow time for shrinkage and structural strain movements.
- KingFix PS50 can be applied directly on gypsum board and other similar substrate without priming as long as these substrates are dry and free from any contaminates.
- Tiles should not be placed over expansion and contraction joints, these joints should be filled with a suitable flexible sealant from the KINGKRETE KingsSeal range.
Application
- Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel.
- Comb the adhesive with a suitable notched trowel horizontally to achieve a bed thickness of 2 - 5 mm.
- Place the tiles with firm pressure to ensure proper contact with the adhesive.
- It is always better to work in a manageable area that can be tilled within the open wet time of the adhesive.
- Leave the tiled surfaces for 24 hours before grouting.
- KingFix PS50 is compatible with KINGKRETE cementitious or epoxy tile grouts.
Cleaning
All tools should be cleaned immediately after use with fresh clean water. Hardened materials should be cleaned mechanically.
Limitations and notes
Limitations
Do not use for:
- Exterior applications.
- Continuous immersed surfaces such as swimming pools.
- On metal surfaces.
- Installation of large format ceramic tiles or natural stone.
Notes
Although the moisture resistance of KingFix PS50 is fair, it is recommended to use KingFix range of cementitious tile adhesives in wet conditions.
Coverage, packaging and storage
Yield
Approximately 1.45 - 1.55 m2 per 5 kg at 2 mm thickness.
Packaging
KingFix PS50 is available in 5 and 25 kg buckets.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.