Tiling & Stone Systems

KingTile RTL5^®

Normal grade, cementitious tile adhesive with good adhesion strength.

⬇ Download TDS Request a Quote →

Fresh wet density

1.75 ± 0.10 g/cm³

Pot life

2 hr @ 25°C

Tensile adhesion strength

> 0.5 MPa @28 days

Coverage

7 m²/20 kg bag @ 2 …

Packaging

Bag

Standards

1 cited

ASTM 2369

Overview

KingTile RTL5 is ready mixed normal grade cementitious tile adhesive composed of a blend of Portland cement, special polymers and well graded sand that when mixed with water produces an easily workable tile adhesive suitable for bonding all kind of ceramic tiles on common substrates.

Applications

Suitable for wall and floor applications
Can be used in wet areas such as bathrooms and kitchens
Can be used in exterior applications
On concrete, cement based mortar, screed and plaster
On drywall such as gypsum boards and fiber cement boards

Advantages

Good bond strength to all common substrates
Easy to apply, non-sag with good workability
Ready mixed, just requires the addition of water
Economical

Technical Properties

Property	Value	Standard
Colour	White or grey	—
Fresh wet density	1.75 ± 0.10 g/cm³	—
Pot life	2 hr @ 25°C	—
Tensile adhesion strength	> 0.5 MPa @28 days	—
VOC	: < 10 g/ltr (complies with LEED) Concrete and cement based substrates must be sufficiently cured and dimensionally stable. Allow time for shrinkage and structural strain movements. Gypsum boards, plaster boards, anhydrite screeds, or any highly absorbent cement based substrates such as hollow blocks and foam concrete must be sufficiently dry and free from dust. These substrates must be primed with Keybond 2000	ASTM 2369
diluted with water at a ratio of 1	2 by volume (1 part Keybond 2000 to 2 parts water). Tiles should not be placed over expansion and contraction joints, these joints should be filled with a suitable flexible sealant from the KINGKRETE KingSeal range.	—