KingSwell 3030®
Hydrophilic Waterstop for Expansion Joint.
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
- Tensile strength
- 25 kg/ cm² above
- Elongation
- 550% above
- Hardness (HS)
- 45 ± 10
- Specific gravity
- 1.1 above
Overview
KingSwell 3030 is a chemically modified natural rubber product with an embedded stainless steel wire mesh. A patented process chemically binds a hydrophilic agent to the rubber. DP-3030N stops water by compression from rubber’s natural resilience and moisture induced expansion.
DP-3030N will fill any void within the limits of its expansion capability. This is a vulcanized product. It has high tensile and compressive strength.
Where to use
KingSwell 3030 can be used in expansion joints. This product is an excellent waterstop for use shear movement joints.
METHOD OF INSTALLATION
Remove any dirt or loose debris from the surface of the concrete. Adhere DP-3030N by using screws, rubber adhesive or Hilti. Construction adhesive depending on choice and site conditions.
For added assurance or in the case of rough concrete, apply a bead of DPS-200 before placing DP-3030N.
Another option is to place a small bead of DPS-200 on both sides of the DP-3030N. Do not allow any gaps between DP-3030N and the concrete. Screw must be perpendicular to the stainless steel wire mesh.
TYPICAL INSTALLATION
Technical properties
| Colour | Black |
|---|---|
| Hardness (HS) | 45 ± 10 |
| Tensile strength | 25 kg/ cm² above |
| Elongation | 550% above |
| Specific gravity | 1.1 above |
| Expansion volume | 150% above |
| Vulcanization | Yes |
Coverage, packaging and storage
Packaging
10 m/ roll, 2 rolls/ box.
Size: 30 mm x 30 mm.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.