KingProof tape SA50®
Self-adhesive non-woven elastomeric sealing tape
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
Overview
KingProof Tape SA50 is a high performance waterproofing tape manufactured from two layers of non-wove polypropylene sheets coated with highly elastic self- adhesive butyl rubber with excellent ageing resistance.
KingProof Tape SA50 is designed to be used in joints and corners in conjunction with the KingProof Range of waterproofing and other systems from KingKrete.
Where to use
KingProof Tape SA50 can be applied for waterproofing of joints and corners at indoor areas subjected to non- pressurized water such as kitchens, shower rooms and bathrooms.
Why use it
- Easy to install, self-adhesive tape.
- Provides an excellent waterproofing and sealing for joints.
- Withstands medium to high loads.
- Good chemical resistant.
Technical properties
Values @ 25°C
| Colour | Grey (Other colours can be supplied upon request) |
|---|---|
| Temperature resistance | - 5 to 60°C |
| Weight | 360g/m² |
| Total width | 120 ± 5 mm |
| Total thickness | 0.70 ± 0.15 mm |
| Total weight | 800 ± 60 g |
| Elongation at breakEN ISO 527-3 | |
| Longitudinal | ≥ 40% |
| Transverse | ≥ 55% |
| Tensile strengthEN ISO 527-3 | |
| Longitudinal | ≥ 20 N/15 mm |
| Transverse | ≥ 15 N/15 mm |
| Water tightnessEN 1928, Version B | ≥ 0.2 bar |
How to use
Method of use
Substrate Preparation
Surfaces should be clean, sound and free from oil, grease, dirt or loose particles. Substrate should be dry, with no standing water. Spalled, cracked or defected substrate should be repaired. New concrete substrates should be at least 28 days old.
Contact KingKrete technical department for more information about the products which can be used in conjunction with KingProof Tape SA50.
Application
Trim KingProof Tape SA50 to a proper size to the applied area. Remove the release liner from the back side of the tape and place it over the prepared area. Using a plastic roller, press with firm pressure the tape to ensure that it is fully adhere to the surface.
Cleaning
All tools and equipment should be cleaned following the manufacturer recommendations of the adhesive or waterproofing product which was used.
Coverage, packaging and storage
Packaging
KingProof Tape SA50 is available in 25 meters roll.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.