🌍 🌐 English
Waterproofing

KingFlex®

Rubberized protection sheet.

SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.

Overview

KingFlex is a rubberized protection and separation sheet reinforced with synthetic fibers.

Where to use

KingFlex is specially designed to be used over KingSure waterproofing membrane to provide protection from construction traffic.

KingFlex also acts as a separation layer between KingSure membrane and different topping layers that complete the waterproofing system.

Why use it

  • Tough and durable.
  • Resists decomposing and rotting.

Technical properties

Thickness
UEAtcMoat 30
2 mm
Mass
UEAtcMoat 30
3.7 kg/ sqm
Density1.25 g/ cm³
Softening pointASTM D36≥ 135°C
Pentration of coating
mixtureASTM D5
8 ± 5 dmm @ 25°C
Flexibility
UEAtcMoat 27
Flexible @ 25°C
Static indentation
resistance at maximum
load of 20 kgBS EN 12730
Not performed
(method B)
Chisel puncture
(650 g, 0.5 m)
< 1 mm
Bitumen contentASTM D545> 75 % by weight
Water absorptionASTM D51470.25%
Water vapour transmissionASTM E960.20 g/ m² per day
Water permeability
UEAtcMoat 27
Impermeable
Chemical resistanceResistant to alcohol, salt
solutions, dilute acids
and alkalies

How to use

Method of use

KingFlex should be properly aligned before application to ensure a 5 - 10 cm overlapping between sheets.

Embed KingFlex immediately after the application of the second coat of KingSure, it is important KingFlex is applied while membrane is still hot in order to ensure full contact.

Coverage, packaging and storage

Packaging

KingFlex is supplied in rolls of 1 m width x 20 m Length.

Storage

Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.

Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.

Health and safety

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes

and skin immediately. If accidentally ingested, seek

medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.

Request the safety data sheet