KingProof Primer A®
Acrylic primer for KingProof A200.
SpecWorld has the Spec Pack, CSI specification and drawings for registered specifiers.
- Specific gravity
- 1.0 ± 0.02
- Solid content
- 45 ± 5%
Overview
KingProof Primer A is an acrylic base coating for use in conjunction with KingProof A200.
Where to use
- For use as a primer coat for KingProof A200 top coat.
Why use it
- Single component.
- Promote adhesion between concrete substrate and subsequent KingProof A200 layers.
Technical properties
| Colour | White liquid |
|---|---|
| Solid content | 45 ± 5% |
| Specific gravity | 1.0 ± 0.02 |
How to use
Surface preparation
Surfaces to receive KingProof Primer A should be clean, sound, and free from oil, grease, dirt and loose particles. Substrate should be dry, with no standing water. Spalled surfaces, cracks and defected concrete should be repaired. New concrete substrate should be at least 14 days old.
Application
KingProof Primer A can be applied by brush, roll, or airless spray machine. One coat should be applied at the rate of 5 m² per liter and allowed to dry before applying the first coat of KingProof A200.
Cleaning
All tools should be washed and cleaned immediately after use with clean water.
Coverage, packaging and storage
Coverage
4 - 5 m² per litre.
Packaging
KingProof Primer A is available in 5 and 25 litres packs.
Storage
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete's Technical Services Department.
Health and safety
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.