KingPlast CE75 is a polymer modified cement wall finishing decorative plaster applied in up to 3 mm thickness. KingPlast CE75 is supplied as a ready mixed blend of dry powders which requires only the site addition of clean water to produce a consistent cementitious mortar.
Applications
KingPlast CE75 is designed as a decorative wall finishing plaster to be applied up to 3 mm thickness on render and concrete walls to produce an artistic textured wall finish
If a very smooth finish is required, a small amount of water may be flicked on to the surface to the KingPlast CE75 with a paint brush prior to final trowelling
After the initial setting time -usually 2 to 3 hours at normal conditions- it is recommended to apply a coat of KingKure 100A over the finished surface
Beside its efficiency as a curing compound, KingKure 100A will work as sealer and protective abrasion resistance coat as well as deepening the finishing coat colour with semi- gloss finish
Note: Traditional curing by water will encourage the appearance of efflorescence and cause some colour variation especially when dark colours are used
Advantages
High mould resistance
High UV resistance
High weather resistance
Shrinkage controlled polymer modified plaster
Easy to apply, one component, requires only addition of water
