KingFloor MM100 is a three component fast curing self-leveling screed based on elasticized methacrylate resin (MMA) for wet and dry areas. KingFloor MM100 will provide floors with very good thermal and mechanical properties and good resistance to acids and alkalis that is suitable for applications in wet and dry areas with a suitable topcoat.
Applications
Smooth Finish
Once mixing is complete, transfer the KingFloor MM100 to the primed surface using a pin rake adjusted to the required thickness
Care should be taken when joining the lanes, to achieve a smooth connection. It is recommended to mask off edges with tape which is then removed while KingFloor MM100 is still wet
After curing of KingFloor MM100, topcoat the surface with Qicktop TC27 as clear topcoat for dry areas. In wet operation areas, KingFloor MM100 must be topcoated with Quicktop TC26
Quicktop
Primer/LV Quicktop
Advantages
Very fast curing, less than 2 hours
Cures even at low temperatures
Easy to clean and maintain flooring system
High abrasion and scratch resistance
Good UV resistance, low yellowing
Can be available in a range of colours (Contact KINGKRETE Technical Department for further details)
Good resistance to acids and alkalis
The system KingFloor MM100/TC26 is resistant to fat and hot water (up to 80°C)
