KingCoat L is a ready for use, general purpose single component solvent based silane/siloxane water repellent impregnation for application on vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, mineral plasters and mineral paints.
Applications
KingCoat L can also be used for injection into walls to prevent rising damp
KingCoat L can be used as a moisture barrier and primer for exterior paints
It is recommended to apply two consecutive coats of KingCoat L at the stated rate of application, or one flood coat. Impregnation can be carried out using airless spray machine, brush, or roller
Notes:
Before applying KingCoat L be sure to cover non- absorbent surfaces properly (windows, aluminum frames, etc.). KingCoat L cures fast and will be extremely difficult, to remove after a few hours
Advantages
Deep penetration into substrate
Very good reduction of water and chloride intrusion
Excellent resistance to alkalis and UV light
Absorbed by the substrate, does not form film and hence does not change or stain the substrate
